Simpler Networks HP200PT64 Bedienungsanleitung PDF herunterladen (Seite 8)

Chapter 3 - Quick Setup

This section is subdivided into three parts:

• Sections 3.1 and 3.2 contain the setup procedures.

• Section 3.3 provides a description of the power saving feature.

NOTE: A single PowerGrid 9020 unit and Ethernet cable are required for each

device (e.g. PC, modem/router) you wish to connect to the network.

3.1 Internet Connection

These steps show how to connect a PowerGrid 9020 unit to a modem or router.

1. Turn on your modem or router.

2. Plug a PowerGrid

9020 unit into the

power socket closest

to the modem/

router. The STATUS

LED on the front

panel of the

PowerGrid 9020

should light up RED.

3. If the AP LED is GREEN continue to step 4. If not,

go back to step 2 and try the other PowerGrid 9020

unit.

4. Connect the PowerGrid 9020 unit to the LAN port of

the modem/router with an Ethernet (RJ-45) cable.

The Ethernet LED on the unit should light up

GREEN.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 40 41

Keine Kommentare

Simpler Networks HP200PT64 Bedienungsanleitung Seite 8